Paragon Kilns International Distributor. Paragon Kilns On-Line Shop and Support Centre.
the paragon trio glass slumping kiln smaller kilns at electrickilns.co.uk or tumblers at electrictumblers.co.uk
kilns
more kilns
support
clays
materials
tools
extras
contact:sales
Paragon Trio Glass Slumping Kiln With A Sentry Xpress Programmer. Paragon Trio Glass Slumping Kiln With A Sentry Xpress Programmer.
Paragon Trio Kiln With A Sentry Xpress Programmer For Annealing, Fusing, And Slumping Glass Bottles.
Paragon Trio-W Kiln With A Window And A Sentry Xpress Controller For Annealing, Fusing, And Sagging.

THE PARAGON TRIO KILN

The Paragon Trio kiln for slumping bottles, and general glass annealing, casting, fire polishing, fusing, lampwork, melting, moulding, sagging, and slumping.

The Paragon Trio kiln is generally used for slumping glass bottles, and annealing, casting, fusing, melting, moulding, sagging, and slumping glass, although it has other applications. It's a 925°C kiln with a digital programmer, in Paragon blue or customised berry, black, jade, navy, pink, purple, or turquoise. Learn about the Paragon Trio kiln on this page.


There are two versions: the Trio and the Trio-W. The W version has a heat-resistant glass viewing-window in the middle at the front.


Prices here are transparent: they're for UK-EU voltage, CE marked, CL CSA approved, and TUV tested kilns, and include comprehensive instructions, UK VAT, and free continuing support from a top-tier international distributor.

For prices, trading terms, and secure on-line shopping, use the shop link below the menu bar near the top-right of any page. The order form is on the shop page, after the price list near the bottom.

Kilns over 30kg can't be delivered by a regular parcel-service van: they need a lorry with a tail-lift and a hydraulic pallet trolley. GB-mainland delivery charges are on the shop page. For other locations, call or mail.

Paragon Trio Kiln With A Sentry Xpress Programmer For Annealing, Bottle Slumping, Fusing, Moulding, And Sagging. Paragon Trio-W Kiln With A Window And A Sentry Xpress Programmer For Annealing, Bottle Slumping, And Glass Work.
Paragon Trio-Sagging And Slumping Kiln. Paragon Trio-W Sagging And Slumping Kiln.
Orton-Paragon Sentry Xpress Programmer. Orton-Paragon Sentry Controller.
Paragon Sentry Xpress Programmer. Paragon Sentry Programmer.
GO STRAIGHT TO THE TRIO KILN

The Paragon Trio kiln for slumping bottles, and general glass annealing, casting, fire polishing, fusing, lampwork, melting, moulding, sagging, and slumping.

If you already know which kiln you want and don't want to, or need to, read any general introductions, compare or review the main features, or consider other kilns, click here to jump down the page:


Click To Jump To The Trio Kiln.

HOW TO CHOOSE A SLUMPING KILN

A GENERAL INTRODUCTION TO THE PARAGON TRIO KILN
Paragon Trio Kiln With A Sentry Xpress Programmer For Annealing, Bottle Slumping, Fusing, And Glass Work. Paragon Trio-W Kiln With A Window And A Sentry Xpress Programmer For Annealing, Bottle Slumping, And Lampwork. Orton-Paragon Sentry Xpress Programmer. Orton-Paragon Sentry Programmer.

The Paragon Trio kiln for slumping bottles, and general glass annealing, casting, fire polishing, fusing, lampwork, melting, moulding, sagging, and slumping.

The Paragon Trio is a 925°C, rectangular, plug-in, top-opening, table-top, firebrick kiln with a ramp-hold Sentry Xpress 3-key digital programmer. Choose Paragon blue or customised berry, black, jade, navy, pink, purple, or turquoise. Customised kilns are made to order, so can't be returned if the colour isn't exactly as in the photos.


Although the internal proportions are suited to slumping two good-size champagne, spirits, or wine bottles, it's also a versatile glass kiln for your craft workshop or glass studio. It's popular with glass artists, for annealing, casting, fusing, melting, moulding, sagging, and slumping. In the US, it used to be called the Fusion 17.


The Sentry Xpress 3-key programmer allows you to create your own ramp-hold sequences: up to twenty-five, each one with up to twenty segments. Depending on the kiln, the optional cone-fire mode will simplify your work with ceramics.
The Sentry 12-key Programmer and touch-screen Sentinel SmartTouch both have advanced and time-saving features, and control over optional extras: an electric kiln vent, a gas injection system, and a USB computer interface.

Digital programmers allow you to set up sequences, each one with multiple heating, holding, or cooling segments: so you can choose the heating and cooling rates, target temperatures, and hold times, save the sequences, and re-use them.

Being able to create, edit, and save your own programmes is important because, having experimented and diversified, most people fire materials, or combinations of materials, at different temperatures and for different times than are recommended.

In Spring 2019, Paragon introduced new versions of the 3-key and 12-key programmers: the Sentry Xpress 4.0 was replaced by the Sentry Xpress 5.0 and the Sentry 2.0 by the Sentry 3.0. Both have extra features and can save more sequences each one with more segments so, at turn-on, will take longer to initialise and validate any saved data. And, whilst running, the relay might click more often as the programmer makes frequent adjustments to the current temperature.


For help, or in the unlikely event of a fault, you can mail or call an engineer in the UK. However, checks, adjustments, and repairs are simple, needing little more than a PosiDriv screwdriver: watch the on-line videos using the watch-videos link or read the help pages using use the help link, both below the menu bar near the top of any page. Alternatively, we can service the kiln in our workshop at Cherry Heaven.

REMINDERS ABOUT THE TRIO KILN

OPTIONAL READING
Paragon Sentry Xpress Programmer PCB. Paragon Firebricks. Paragon Type-K Thermocouple. Paragon Shelf Kit.

Why Is A Paragon Trio Kiln The Best Mix Of Technologies At The Best Price?

It's available in eight colours at no extra charge: the standard Paragon blue or customised berry, black, jade, navy, pink, purple, or turquoise.

The Sentry Xpress 3-key programmer allows you to create your own ramp-hold sequences: up to twenty-five, each one with up to twenty segments.

When the programmer turns the elements off at, for example, 700°C, residual heat will continue to increase the temperature briefly. A small kiln might overshoot to 715°C before dropping back down. A software modification slows down the heating just before the target temperature, reducing any overshoot and improving the accuracy.

The thermocouple is a special-limit nickel-chromium K-type. It responds quickly to temperature changes, resists corrosion, and has an error margin of less than 0.4% instead of the typical 0.8%. However, for continual high-temperature high-precision professional use, it can be upgraded to platinum-rhodium S-types.

The US-international kilns don't come with a shelf or posts or kiln wash. However, I've recommended pro kits because a durable heavy shelf resists thermal fracture, provides a smooth stable work surface, protects the floor of the kiln's interior from glass accidents, and helps to even out any small temperature deviations during annealing, enamelling, firing, fusing, and heat treating as the elements turn on and off.


Use it for for silver clays, annealing beads and glass, bronze and copper clays, china painting, crystalline gazes, applying decals, dental work, dichroic glasses, painting dolls, enamelling, fire polishing, glass art, fusing, moulding, sagging, and slumping glass, heat treating, knife-making, laboratory testing, lampwork, lost-wax casting, low-fire ceramics, making jewellery, melting gold and silver, forming gun and model parts, pâte de verre, sintering gold and silver clays, staining glass, hardening and tempering blades, cutters, dies, and tools, and many other materials and processes.

Although smaller kilns are more economic for jewellery-making, you can still use most popular small-scale materials such as Accent Gold, Art Clay metal clays, BullsEye glasses, dichroic glasses, enamels, GlasClay, Image Transfer Solution, Metal Clay Veneer, PMC silver clay, Prometheus bronze clay, ProCopper clay, and SilverEtch.
And there's an increasingly diverse range of other metal clays, such as Cinter, Clay Mania, Creative, Goldie, Hadar Jacobson, Metal Adventures, Meteor, Noble, and PMC Sterling.

You can make architectural features, beads, bowls, bracelets, brooches, candle holders, ceramic art, chandelier components, decorations, figurines, fingerprint keepsakes, glass-art, glass panels, jewellery, knives, lampshades, miniatures, gun and model parts, mugs, necklaces, ornaments, pendants, plates, porcelain beads, souvenirs, stained-glass designs, tableware, tiaras, tiles, tools, and vases, as unique hand-crafted pieces or repeatable stock for sale.


They're ideal for your arts centre, ceramics showroom, college, course venue, shared craft units, dental lab, engineering works, glass works, knife studio, machine shop, medical laboratory, metal-work business, technical facility, or university.

IS A PARAGON TRIO THE BEST CHOICE?

OPTIONAL READING
Paragon Trio Kiln With A Sentry Xpress Programmer ForAnnealing, Bottle Slumping, And General Glass Work. Paragon Trio-W Kiln With A Window And A Sentry Xpress Programmer For Annealing, Bottle Slumping, And Glass Work. Orton-Paragon Sentry Xpress Programmer. Orton-Paragon Sentry Programmer.

Is A Paragon Trio Kiln Going To Be The Best Overall Choice?

The Trio is classed as a glass kiln, so hot enough, at 925°C, for slumping bottles and general glass work, within its size limits. The flat-bed CS and Fusion kilns are similar but larger. However, if you think that a smaller, larger, or hotter kiln might be more versatile, here are some suggestions:


Bead-annealing kilns generally have a maximum temperature of 650°C, such as the BlueBird Series. However, other kilns have bead doors: the small Caldera-B and SC2B, the medium Xpress-E12B, and the larger Fusion-14B.

Glass kilns generally have a maximum temperature of 925°C. For these, look at the F Series, Fusion:CS Series, GL Series, or Pearl Series. These are not hot enough for ceramics.

Jewellery, silver clay, and enamelling kilns generally have a maximum temperature of 1095°C. For these, look at the small SC Series or the medium Xpress Series. The SC series are not hot enough for ceramics.

Ceramics kilns generally have a maximum temperature of 1290°C. For these, look at the small Caldera Series and FireFly Series, medium Xpress Series, or large Janus Series, PMT Series, and TNF Series. These can also be used for glass work.

Heat-treating kilns generally have a maximum temperature of 1290°C. For these, look at the HT Series and PMT Series. Although they look similar, the HT has a bottom-hinged door and the PMT has a side-hinged door.

Knife-making kilns generally have a maximum temperature of 1290°C. The KM Series are made for depth rather than width. You can choose a guillotine, drop-down, or a side-hinged door.

The W Series have a top vent so are usually used for jewellery moulds and lost-wax burnout. For lost wax casting there are optional metal grids and wax trays. The small SC Series and most of the medium Xpress Series also have top vents.


To learn more about other kilns, use the appropriate links below the menu bar near the top of the page. However, as each series has kilns of different sizes with different options there's only a selection in the table below:


VERSION DESCRIPTION MAX °C POWER W WEIGHT KG FIRING CHAMBER INTERIOR SIZE MM
Trio top-opening 925 1800 54 firebrick square 451 x 273 x 165
Fusion 14 top-opening 925 1800 48 firebrick square 356 x 356 x 165
Fusion CS14S body-opening 925 1800 71 firebrick square 356 x 356 x 165
Fusion CS14D lid and body-opening 925 1800 71 firebrick square 356 x 356 x 165
Fusion 16 top-opening 925 2400 75 firebrick square 406 x 406 x 165
Fusion CS16S body-opening 925 2400 85 firebrick square 406 x 406 x 165
Fusion CS16D lid and body-opening 925 2400 85 firebrick square 406 x 406 x 165
Fusion FibreFuse 16 top-opening 925 1800 34 fibre 406 x 406 x 152
BlueBird XL two bead doors 815 1700 36 firebrick rectangular 508 x 229 x 114
F500 two punty doors 650 6850 273 firebrick rectangular610 x 457 x 565
Janus 1613 top-opening 1290 4800 90 firebrick eight-sided 419 x 337
Pearl-22 top opening 925 7200 146 firebrick square 559 x 559 x 330
PMT18 front-opening 1290 6500 170 firebrick rectangular 330 x 457 x 330


After looking at the kiln in detail, I'll introduce the appropriate accessories, options, and upgrades.

THE PARAGON TRIO

BOTTLE SLUMPING, AND GLASS ANNEALING, FUSING, MOULDING, AND SAGGING
Paragon Trio Kiln With A Sentry Xpress Programmer For Annealing, Bottle Slumping, And General Glass Work. Paragon Blue Or Customised Berry, Black, Jade, Navy, Pink, Purple, Or Turquoise. Orton-Paragon Sentry Xpress Programmer.

The Paragon Trio kiln for slumping bottles, and general glass annealing, casting, fire polishing, fusing, lampwork, melting, moulding, sagging, and slumping.

The Paragon Trio is a 925°C, rectangular, plug-in, top-opening, table-top, firebrick kiln with a ramp-hold Sentry Xpress 3-key digital programmer. Choose Paragon blue or customised berry, black, jade, navy, pink, purple, or turquoise.


The UK-EU kiln is rated at 230V-240V 1800W, so it can use a regular mains socket. To comply with EU safety regulations, it's fitted with an additional switch that cuts off the power when the kiln is opened. However, never get careless: kilns are very hot and connected to the mains.

The external dimensions are 787mm x 584mm x 457mm. The case has an integral stand with four rubber feet and the lid has a stay-cool wooden handle. The shipping weight, including the crate, is about 54kg.

The firing chamber measures 451mm x 273mm x 165mm high, and heats from the top, with the elements in dropped recessed grooves in the 76mm thick bricks. The kiln has an electro-mechanical relay and a nickel-chromium K-type thermocouple.


The programmer's electronic display prompts for heating rates, target temperatures, and hold times, making it easy to set up and re-use accurate heating, holding, and cooling sequences.


The accessories, options, and upgrades for this kiln are in the on-line shop:

List. a berry, black, jade, navy, pink, purple, or turquoise respray: normally blue
List. a programmer upgrade: Sentry Xpress 3-key to a Sentry 12-key: more useful features: factory fitted
List. a 75mm x 25mm heat-resistant glass viewing-window: factory fitted
List. a long-life mercury relay upgrade: factory fitted
List. a long-life S-type platinum-rhodium thermocouple upgrade: factory fitted
List. stacking shelf kits and shelf paper
List. charcoal for the stainless steel container used for firing some metal clays
List. lost-wax burn-out, casting, and enamelling tray
 List. ceramic fibre cloth
List. ceramic block
List. HEPA dust mask
List. clear protective glasses
List. glare-resistant glasses
List. heat-resistant gloves

And finally, my opinion.

Although the internal proportions are suited to slumping two good-size champagne, spirits, or wine bottles, it's also a versatile glass kiln for your craft workshop or glass studio. It's popular with glass artists, for annealing, casting, fusing, melting, moulding, sagging, and slumping. In the US, it's sometimes called the Fusion 17.

THE PARAGON TRIO: KILN FURNITURE

Shelf Kits For The Paragon Trio Kiln.

The US-international kiln doesn't come with a shelf or posts or kiln wash. However, there's a recommended kit, not included in the price: one durable 432mm x 254mm x 15mm cordierite shelf, four 12mm shelf posts, and 450gm of kiln wash.

The pro shelf resists thermal fracture, provides a smooth stable work surface, protects the floor of the kiln's interior from glass accidents, and helps to even out any small temperature deviations during annealing, enamelling, firing, fusing, and heat treating as the elements turn on and off.

Depending on the material or process, and the sizes of your pieces, stacked shelves will hold more work, free up your time, and reduce the unit firing cost, so there's an extra recommended kit, not included in the price: one 432mm x 254mm x 15mm shelf and four posts. The kiln has room for two shelves so you can choose 12mm, 25mm, 50mm, 75mm, or 100mmm posts.

The kiln is large enough to accommodate a charcoal-filled stainless steel container needed to fire some makes of bronze clay and copper clay, both described on this internet resource.

The lost-wax burn-out tray for this kiln measures 279mm x 190mm x 25mm. There are two parts: a stainless steel tray and a metal mesh that fits into the tray. The melting wax drops into the tray instead of onto the floor of the kiln. The tray and mesh can also be used for supporting beads, enamel work, and fused glass.

THE PARAGON TRIO-W: WINDOW

BOTTLE SLUMPING, AND GLASS ANNEALING, FUSING, MOULDING, AND SAGGING
Paragon Trio-W Kiln With A Window And A Sentry Xpress Programmer For Annealing, Bottle Slumping, And Glass Work. Paragon Blue Or Customised Berry, Black, Jade, Navy, Pink, Purple, Or Turquoise. Orton-Paragon Sentry Xpress Programmer.

The Paragon Trio-W kiln with a window for slumping bottles, and general glass annealing, casting, fire polishing, fusing, lampwork, melting, moulding, sagging, and slumping.

The Trio-W includes a 75mm x 25mm heat-resistant glass viewing-window in the centre of the front. Otherwise it's the same as the Trio.

The window allows you to take a quick peep at china paints, enamels, glass, and glazes to check on their progress: and you might find it interesting or reassuring to watch what happens during the firing sequence.
The window will cause a modest heat loss so the kiln might not heat as quickly or reach its top temperature. To resolve this, tuck a piece of ceramic-fibre cloth behind the glass. Ceramic-fibre cloths are in the on-line shop.


If you look into a red-hot kiln, even very briefly, it's important to wear glare-resistant glasses to protect your eyes from IR and UV radiation. Hot glasses are in the on-line shop.

RECOMMENDED READING
General Help and FAQs For Kilns. Paragon Kiln Shelf Kit. Paragon Relay. Paragon Transformer.

Kilns, Digital Programmers, Kiln Furniture, Options, Upgrades, Firing, Kiln Logs, Accessories, Materials, Parts, Processes, Repairs, And Tools.

The remaining sections are about digital programmers, shelf kits, options, upgrades, firing, kiln logs, accessories, materials, parts, processes, repairs, and tools. Unless you're already successfully using a kiln, they're recommended reading.


Cherry Heaven has been a Paragon distributor since 2002, and commended every year for outstanding performance. Paragon kilns are good value: buy Paragons and you could save enough to treat yourself to a luxury five-star weekend break.

Anyone can buy a kiln to resell and call themselves a specialist, but a top-tier distributor understands all the kilns, options, and upgrades, will stock spares, offers free competent technical support, can help you repair your kiln, provides on-line repair videos, has a repair workshop, and can access Paragon's extensive knowledge-base.

If you need help, you can mail an experienced technician or call . Alternatively, to learn more about how your kiln works, use the help link below the menu bar near the top of the page.

KILN FURNITURE: A GENERAL INTRODUCTION IMPORTANT
Paragon Kiln Shelf Kit. Paragon Rectangular Kiln Shelves. Paragon Round Kiln Shelves. Paragon Mixed Kiln Shelves.

Kiln Furniture: Rectangular, Round, Hexagonal, and Octagonal Shelves, And Posts.

Most kilns have a recommended furniture kit. Delivery companies have a low rate for parcels less than 30kg so, for smaller kilns weighing less than 30Kg, the kit is generally one shelf and four posts: included in the price because it fits in the box and doesn't add much to the overall weight.

You get a professional, durable, cordierite shelf with four 12mm high posts. You don't get a soft, ceramic-fibre shelf, often described as free, that will gradually break up and need replacing.

Shelf kits for rectangular or square kilns usually include four 25mm x 25mm x 12mm shelf posts, When flat, they're 12mm high: on their sides, they're 25mm. Other sizes, up to 150mm high, are available, so you can choose the shelf spacing that suits your kiln and your work. Shelves for cylindrical kilns usually have three posts.

The recommended kit is usually the simplest that works: not an expensive collection that I've put together for you. However, extra shelf kits allow you to stack your work, optimising your use of the firing chamber volume, the unit-cost of firing, and your time. And extra half-shelves or smaller shelves allow you to fire a mix of shorter and taller pieces.


For larger kilns weighing more than 30Kg, shelf kits are not included in the price because you'll probably want to choose your own mix of shelves, half-shelves, smaller shelves, and assorted-height posts.


One shelf should stay on the floor of the firing chamber all the time in case you accidentally spill or melt anything: solidified glass or metal is impossible to pick off without damaging the ceramic-fibre or firebrick.

Shelves are not meant to be an exact fit in the kiln. You need finger space all round and they mustn't scrape the kiln walls every time they're put in or taken out. Be careful lifting heavy shelves out of a top-opening kiln: if you drop them they will damage the firebricks.

Although they look tough, most ceramics break if they're dropped on a hard floor, so it's a good idea to have spare shelves, especially if your business depends on your kiln or you're running courses.


During firing sequences with heating, holding, and cooling segments, the elements turn on and off repeatedly. In a small kiln, with little residual heat, the inevitable temperature changes can make glass crack as it expands and contracts. A thick heavy shelf stores heat and, because it's resting on posts, the air circulates, helping to even out the normal temperature fluctuations.


If you're buying your first kiln, you're probably interested in one material, such as silver clay, or one process, such as enamelling. However, after a few successes, and failures, most people want to try different materials, make larger pieces, experiment with combinations, fire more at a time, and soon become interested in something else: or everything else. Some start a business or run classes.

You might want a full shelf, two half-shelves, several mixed shelves, a set of shelf posts, a bead-mandrel holder, glass separator, hot gloves, kiln wash, a knife-making rack, pyrometric cones, a tile holder, or other accessories.

Shelves are heavy, so kits ordered separately need a box and protective packing and attract an extra delivery charge. Outside the UK mainland, this might be expensive. So, if you think you'll need them, order them with your kiln, along with any other accessories, materials, parts, or tools.


For dichroics, enamelling, and glass fusing, put kiln paper on the shelf to stop the glass sticking: it's simpler and cleaner to use than glass separator. Bullseye Thinfire shelf paper, probably the most popular, ensures easy separation between your glass and the kiln shelf. One side feels slightly smoother than the other: that's the glass side.

Generally, glasswork needs radiant heat and will fuse, sag, or slump better on one shelf than between closely stacked shelves, although experienced glass artists often use several shelves successfully.

Delicate pieces can be fired on a puffed-up ceramic-fibre cloth: on a shelf. Round pieces, that could roll to one side, can be fired on a hollowed-out ceramic-fibre block. However, if the kin has elements in the bottom as with the Mini-Kiln and Prometheus Pro-7, a cloth or block will act as insulator and the kiln might overheat.

Particulates represent a health risk if they're breathed in, so wear a HEPA mask when cleaning out your kiln, mixing kiln wash, and working with ceramic-fibre blocks, ceramic cloths, and papers. And, ideally, use protective glasses.

If you want to touch anything hot, or move your kiln before it's cooled off, it's important to wear heat-resistant gloves. And, if you want to look into a red-hot kiln, even briefly, wear glare-resistant glasses to protect your eyes from IR and UV.


If your day-to-day work depends on your kiln and down-time will be disruptive or expensive, it's a good idea to have spares: extra shelves, a selection of posts, elements, a relay, and a thermocouple.

You can learn about ceramic blocks and cloths, charcoal, dust masks, glare-resistant glasses, glass separator, heat-resistant gloves, kiln vents, kiln wash, programmers, protective glasses, USB interfaces, shelf paper, tools, and other accessories, using the accessories link below the menu bar near the top of the front page. And they're all in the on-line shop.


Shelves are checked before despatch and are wrapped protectively. But they're not guaranteed and we cannot be responsible for any later damage.

OPTIONS AND UPGRADES: A GENERAL INTRODUCTION
Paragon Xpress E9A Jewellery Kiln With A Sentry Xpress Programmer: Purple. Paragon Bead Door. Paragon Door Window. Paragon Solid State Relay.

Options And Upgrades.

It's important to learn about options and upgrades now as some have to be factory-fitted. The photo shows a Paragon Xpress E9A customised for a PMC silver clay studio: purple, with the maximum temperature set to 925°C so that students couldn't accidentally melt their silver.


An option is cosmetic or practical, such as a black respray, a right-hand door hinge, a peephole-vent, a bead-annealing door, a door or lid viewing window, or an EU plug.

An upgrade extends the standard specifications, such as a higher maximum temperature, a 3-key to a 12-key programmer, an electric kiln vent, a gas injection control system, an auxilliary power output, or a USB computer interface.

Not every option or upgrade applies to every kiln, so mail or call if you need help. However, if they're appropriate, they're listed in the on-line shop, so just add up the ones you want: but order them with your kiln as they're often difficult, expensive, or impossible, to implement afterwards. It might help if you make a few notes of your own as you read?


Kilns use regular single-phase 230V-240V mains so have 230V EU elements, not 120V US elements. The smaller kilns have UK 13A three-pin plugs: so they're ready to go. If you're not in the UK, use a plug adapter or cut off the UK plug and fit your own: it won't invalidate the guarantee. Alternatively, a special-order kiln can have a factory-fitted EU plug.

Most kilns can be re-engineered for 110V, 200V, 208V, or 220V, single phase or three phase, or 440V three phase. If you're interested, mail or call.


Although standard EU and US kilns have the same maximum temperature, set by the design and the programmer, some 1095°C firebrick kilns can be re-engineered to run at 1230°C, 1260°C, or 1290°C, making them versatile mixed-media kilns. However, to use 1290°C full-on hour after hour, choose an industrial or professional model.

Also, to maintain 1290°C, some upgraded kilns might need thicker firebricks, so they'll be slightly smaller inside: about 12mm on each side. Mail or call if you're interested, or need help deciding.

The UK factory-set maximum temperature is based on a reliable average voltage of 240V. If there's a regional, national, or temporary voltage drop, high-temperature kilns might take longer to reach their specified maximum or not reach it.


Some kilns are normally blue, but can be factory-painted berry, black, jade, navy, pink, purple, or turquoise. However, as they're made to order, they can't be returned if the colour isn't exactly the same as in the photo.

Changing the door hinge might be better if your kiln is in the corner of your studio or there's an obstacle that will make access difficult. Give this some thought.

Most of the medium-size top-opening kilns have a standard lift-up lid. Firebrick lids seem heavy to some people so, if you feel that a ceramic fibre lid, a hydraulic-assisted lid, or spring-assisted lid would be easier, mail or call.


If the kiln comes with a Sentry Xpress 3-Key ramp-hold programmer, you can upgrade to a Sentry Xpress 3-Key cone-fire ramp-hold programmer, usually preferred for ceramics. Cone-fire is implemented in the programmer's software and is very easy to use: just set a cone number and start the firing sequence.

Depending on the kiln, you can upgrade a Sentry Xpress 3-key programmer to a Sentry 12-Key ten segment ramp-hold, or cone-fire ramp-hold, programmer, with advanced firing features and connection options. The 3-key has a 12-month guarantee and the 12-key has a 30-month guarantee.

A Sentry 12-key programmer can be connected to your computer through a factory-fitted USB interface. The Control Master software allows you to control and monitor the firing, and analyse, arrange, print out, and save the data. If you want this feature, make sure you order the USB interface in the on-line shop.


Depending on the kiln, the 12-key programmer has a power-ratio feature: you can adjust the heat balance between the top and sides in 10% steps and control the heat distribution over larger pieces.

Kilns which only heat from the top, as opposed to the top and sides, don't have the power-ratio feature. However, the initial cost-saving has to be offset against fewer firing options.


With larger kilns, serious glass artists are always concerned about firebrick dust from the lid falling onto their work, so you could upgrade the standard firebrick lid to a factory-fitted ceramic-fibre lid with the elements threaded through pinless grooves in the fibre: or, as a luxury upgrade, with the elements completely embedded in the fibre.


Most kilns come with an electro-mechanical long-life nickel-chromium K-type thermocouple. However, if extra long-life and reliability are vital, you can upgrade to a mercury relay which has a lifetime of several million on-off cycles. The relay can switch 30A, so if you have a kiln that needs 50A, you'll need two relays.

If extra long-life and reliability are vital, especially at temperatures above 1100°C, you can upgrade to a long-life S-type platinum-rhodium thermocouple.


Some front-opening kilns are just too large and too heavy for a regular worktop, so Paragon makes a strong steel table, 768mm x 768mm x 718mm high, with two shelves for your accessories. The luxury version, with castors, is 63mm taller. If you decide to buy on old wood table, the rigidity of the legs is vital otherwise it will collapse like a parallelogram.


Some bronze and copper clays, and some metals, need to be fired in activated charcoal granules in a stainless steel container. The SC2 and SC3, the Caldera-A, and the Xpress E9A and E10A can hold a one-litre container: most other kilns can hold a three-litre but check the internal size before you buy the container. It's important that the container doesn't touch the thermocouple.

Particulates represent a health risk if they're breathed in, so wear a HEPA mask when cleaning out your kiln, mixing kiln wash, and working with charcoals, ceramic-fibre blocks, cloths, and papers. And, ideally, use protective glasses.

If you want to touch anything hot or move your kiln before it's cooled off, it's important to wear heat-resistant gloves. And, if you want to look into a red-hot kiln, wear glare-resistant glasses which protect your eyes from IR and UV.


Paragon kilns, made in the US, have been re-engineered and comprehensively tested for the UK, the EU, and most other countries. They're CE Marked and comply with EU safety standards. They're guaranteed for a year, and Paragon has an international, informed, and supportive user-base, and spares and repair centres.

The UK-EU digital programmer shows degrees Celsius, not degrees Fahrenheit as in the US. If you need to convert, this is how to do it. However, if you want to work in Fahrenheit, you can make a simple change to the programmer.


For help, or in the unlikely event of a fault, you can mail or call an engineer in the UK. However, home checks, adjustments, and repairs are quick and easy, needing little more than a PosiDriv screwdriver, and you can watch on-line videos. Alternatively, we can repair the kiln in our workshop at Cherry Heaven.

As with a lot of heavy consumer products made in the US but sold elsewhere, Paragon's guarantee covers replacement parts, not a return to the distributor or factory, and not any labour costs. However, as an example, replacing a programmer takes just a few minutes.

FIRING CHARACTERISTICS

How Electric Kilns Work.

Generally, as soon as a programmable kiln starts its firing sequence, it begins to heat up at a rate set by the programmer. It can't heat up quicker than it would do with the elements full on all the time.

The thermocouple tells the programmer the current internal temperature and, depending on the sequence you've chosen, the programmer turns the elements on or off to control the sequence segments: the heating rate, the target temperature, the hold time, and the cooling rate. It can't cool down quicker than it would do with the kiln turned off. When the sequence is complete, the kiln beeps, and the sequence stops.


For safety, the programmer doesn't switch the full mains voltage. Instead it drives a relay, an electro-mechanical switch. The programmer uses a low voltage to activate the switch which turns the high-voltage high-current elements on or off.


When the target temperature is reached, the programmer switches the elements off. However, residual heat in the firing chamber allows the internal temperature to overshoot the target temperature briefly before starting to fall back.

This overshoot is more evident at low temperatures than at high temperatures, and in small kilns rather than large kilns. For example: 300°C will probably overshoot to 350°C whereas 800°C will probably only overshoot to 805°C before starting to fall back.

However, our Sentry Xpress programmers have a software modification that slows down the heating just before the target temperature, reducing any overshoot and improving the accuracy.

During the hold-time, with the elements still off, the temperature starts to fall. When the programmer switches the elements back on, the firing chamber will initially absorb some of the new heat before the temperature recovers. The continual switching of the elements on and off causes the internal temperature to oscillate either side of the target temperature.

This is similar to central heating. If you set it for 21°C, it probably oscillates, quite slowly, around 20°C to 22°C: and you won't notice. The accuracy will depend on where the thermostat is sited, how quickly it responds, how accurate it is, how long it takes for the radiators to heat up, and if you have doors and windows open. The temperature will probably be different in each room.

So, regardless of the thermocouple temperature, the actual temperature of your work will be slightly different, depending on its position on the kiln shelf, the vertical spacing of any stacked shelves, and its nearness to the elements, a lid, a door, a bead door, or a window. Learn to take this into account if you're working with temperature-critical materials or processes.


Remember that glass needs radiant heat and will fuse, sag, or slump better on one shelf at the bottom than between closely stacked shelves.


Kiln doors and lids are not meant to be a perfect fit otherwise, at high temperatures, there'd be no room for expansion and movement, and the door could stick and the ceramic-fibre or firebricks could crack.

All kilns smell a bit, and even produce whisps of smoke, during the first firings, just like a toaster or a fan heater. If you're worried about fumes, open a window.

Eventually, with normal use, kilns discolour slightly, inside and outside, and some firebricks might develop hairline cracks. Your kiln is a versatile, robust, red-hot tool: not an ornament.

KEEPING A KILN LOG

Keeping A Kiln Log.

Using your kiln successfully needs critical research and frequent tests, especially as things that work for your friends and teachers might not work in the same way for you. It's also very important to learn how to creatively use unexpected effects. So, keep a firing log:


Buy a durable notebook. Use a new page for every firing, and draw diagrams of the shelves, their vertical spacing, and the position of your work on the shelves. Along with your work, put a few scraps at different places on the shelves to learn how things change. Describe the material, the shape of your work, the firing cycle, and the end result. Add a few photos and sketches, and mark the page corners with coloured dots or symbols as a quick reminder of your success rating.

A kiln log is vital if you're experimenting with temperature-sensitive materials or working with metals, coloured dichroic glasses, enamels, glazes, or china paints, and a skilled artist will use the kiln log to advantage to re-create effects. It'll be particularly useful if you have to repeat a commission, or you have a long holiday before returning to your studio.


Some Paragon kilns have a Sentry 12-key or a Sentinel Touch Screen programmer which can be connected to your computer through a factory-fitted USB interface. The Control Master software allows you to control and monitor the firing, and analyse, arrange, save, and print out the data. If you want this feature, make sure you order the USB interface in the on-line shop.

A BRIEF INTRODUCTION TO GLASS
Obsidian. Fish. Curved Glass by Infabbrica. Lauscha By Carrie Fertig.

What Is Glass?

The main component of glass is silicon dioxide, often called silica: found naturally and plentifully as sand. When it melts, at around 1700°C, it's like syrup on a cold day. When it cools, it forms a rigid brittle glass called quartz glass.

To lower the melting point, and reduce the cost of melting, chemicals are added: typically sodium carbonate and calcium oxide. Other chemicals, and different heating and cooling processes, produce a range of colours and mechanical properties.

Chemically, glass is defined as an amorphous solid but, as it's heated, it becomes softer allowing it to be blown, cast, coated, decorated, engraved, heat-treated, moulded, poured, pressed, sagged, and slumped.

A form of glass occurs naturally within the mouth of a volcano when the intense heat of an eruption melts sand to form Obsidian, a hard black-to-brown glassy type of stone, shown in the photo. Although it was used decoratively, when it fractures it has very sharp edges, many times sharper than a steel knife-edge, so was also used for tools and weapons, and the pitiful rituals of circumcision and female genital mutilation.

ANNEALING
Annealed Beads Made Into A Necklace.

What Is Annealing?

During annealing, fabrication stresses are relieved as the molecules cool and arrange themselves into a regular stable matrix. Successful annealing is the key to creating glasswork that will remain attractive and durable. It's quite a long process, so a kiln with an automatic comprehensive programmer is essential.

FREE BEAD ANNEALING GUIDE

Bead Annealing Guide.

You can download, and print, a Bead Annealing Guide. Paragon created it in 2013 so it's only a guide, not a contemporary definitive document. Click here. It's a pdf file, but your device should already have a pdf viewer.

DICHROIC GLASS
Dichroic Glass.

What Are Dichroic Glasses.

Dichroic glass has two different colours: a transmitted colour and a reflective colour, both of which change depending on the angle of view. For example blue-red will be blue in transmission and red in reflection.

During manufacture, quartz and metal oxides are vapourised onto the surface of the glass using a vacuum deposition process, forming a multi-layer crystal structure.

ENAMELLING
Enamelled Jewellery.

What Is Enamelling?

Enamelling involves applying a glass paste to metal and then heating it to fuse it to the surface. The finish of the enamel can be translucent or opaque depending on the temperature used to melt the glass. Higher temperatures result in a more transparent and durable enamel whilst lower temperatures give a more opaque and fragile surface. Dyes and pigments can be included to produce any colour.

The Paragon SC2 is ideal for enamelling, although other kilns are fine. So click the sc2-sc3:jewellery link below the menu bar near the top of the page. The SC-2W and SC-3W doors include a 50mm x 50mm heat-resistant glass viewing-window in the centre of the door, allowing you to take a quick peep at china paints, enamels, glass, and glazes to check on their progress

FIRE POLISHING
Fire Polished Glass.

What Is Fire Polishing?

To fire polish glass, return the items to the kiln and melt them just enough to give a smooth polished appearance. It needs a temperature of around 700°C, and is often used to round the edges of glass after fusing.

Fire polishing already-slumped items is more difficult because the polishing temperature is close to the slumping temperature and it can distort the appearance of the piece. So it generally works best for flat items, rather than slumped ones. It has the slight limitation that the part of the item that touches the kiln shelf won't polish.

FUSING, SAGGING, AND SLUMPING
Fused Glass.

What Is Glass Fusing?

If two or more pieces of glass in contact are heated, they begin to soften and fuse together. With careful heating and cooling, the separate pieces of glass become one.

If glass is put on a mould and heated, it begins to soften and collapse, or sag, onto the mould: a common technique for making bowls and plates.

Sagging and slumping are often thought of as being the same. Correctly: during sagging, heated glass, supported at its edges, sags down in the middle to conform to a mould; during slumping, heated glass, supported at its middle, slumps down at its edges to conform to a mould.

LAMPWORK AND BEADS
Beads.

What Is Lampwork?

Lamp-working is the traditional name for glasswork that uses a flame to melt glass rods and tubes. As the glass softens, it's shaped by turning and using tools.

Early lampworkers used an oil-lamp, and blew air into the flame through a pipe. Later, propane, natural gas, or butane torches replaced the lamp, although kilns are now increasingly popular, particularly for annealing.

Beads are usually made on steel rods, or mandrels. When the beads are finished, the rods are removed leaving holes for threading the beads. Cold working techniques can be used, such as etching, faceting, polishing, and sandblasting.

LOST-WAX BURNOUT
Paragon W13 Lost Wax Casting Kiln With A Sentry Programmer.

What Is Lost Wax Casting?

Lost-wax burnout starts with making a wax shape and then making a mould of the shape. When the mould is heated in a kiln, the wax melts out through channels, usually over a burnout grate and into a tray. The shape is then cast in glass or metal from the mould.

It's important to prevent wax or carbon sticking to the elements, so burnout kilns have a top vent to release the fumes. Carbon build-up inside a kiln conducts electricity and can cause the elements to short circuit.

Paragon make kilns designed for this: the W series. So click the w:lost-wax-burnout link under the menu bar near the top of the page. They all have top vents and optional wax trays.

PÂTE DE VERRE
Pâte De Verre.

What Is Pâte De Verre?

Pâte de verre involves making a glass paste, applying it to a mould, firing it, and removing the piece from the mould. The glass paste is usually made from glass powder, a binder such as gum arabic, distilled water, and colouring agents or enamels. It allows precise placing of colours in the mould, whereas other techniques often result in the glass straying from its intended position.

I think, currently, Daum is the only large commercial crystal manufacturer using the pâte de verre process for art glass and crystal sculptures.

SLUMPING BOTTLES
Slumped Bottle.

What Is Glass Slumping?

This a simple technique but it requires good ideas. A bottle, such as those used for wine, beer, cola, or champagne, is softened in a kiln so that it begins to flatten out or conforms to a mould. There are too many moulds to stock here but there are lots available on line. Or make your own from clay.

The bottles need to be clean and dry, with all paper labels and tops removed. Put them in your kiln on a shelf, either with shelf paper or kiln wash to prevent the glass sticking to the shelf.

Paragon makes a kiln designed for this: the Trio. So click the trio link below the menu bar near the top of the page. It's wide enough for most bottles but can still use a regular socket.

STAINED GLASS
Stained Glass.

What Is Stained Glass?

Stained glass is glass that has been coloured by adding metallic salts during its manufacture. The coloured glass is crafted into stained glass windows in which small pieces of glass are arranged to form patterns or pictures, traditionally held together by strips of lead and supported by a rigid frame. Painted details and yellow stain are often used to enhance the design.

The term stained glass is also applied to windows in which the colours have been painted onto the glass and then fused to the glass in a kiln.

It requires artistic skill to conceive an appropriate and workable design, and engineering skills to assemble the piece. A window must fit snugly into the space for which it is made, must resist wind and rain, and also, especially in the larger windows, must support its own weight. Many large windows have withstood the test of time and remained substantially intact since the Late Middle Ages.

TACK FUSING
Tack Fused Glass.

What Is Tack Fusing?

Tack fusing is the joining together of glass, with as little change to the shape of the pieces as possible. Tack fusing may be used either decoratively, or to assemble a large piece of glass from laminations.

Where tack fusing is used to apply small decorative details to a larger piece, you might want to partially melt the small pieces so that they change shape, usually becoming more spherical under the influence of surface tension, but without changing the shape of the carrier piece. This can be done by using an increased temperature, but only briefly. The carrier piece has a larger thermal mass, so heats up more slowly than the small decorations.

VITRIGRAPH WORK
Glass Stringers.

What Is Vitrigraph?

The vitrigraph process usually uses a kiln to make glass stringers. The bottom of the kiln is removed and set aside. The kiln body is put on a thick ceramic square with a central hole.

A crucible of glass is put inside, and the whole combination lifted well away from the floor to allow moulten glass to fall through a hole in the crucible and form long stringers. Ceramic squares are in the on-line shop.

Paragon make a kiln designed for this: the Caldera. So click the caldera:ceramics link below the menu bar near the top of the page. The bottom is a separate part and can be unclipped.

WARM GLASS
Warm Glass Flower Bowl.

What Is Warm Glass?

The term warm glass refers to fusing, slumping, and other glass processes which take place at temperatures between about 600°C to 925°C. Although that doesn't sound warm, it is when you compare it to glassblower's working temperatures, which often exceed 1100°C. Warm glass is sometimes called kiln-formed glass.

PARAGON KILNS INTERNATIONAL DISTRIBUTOR
Paragon Trio Glass Kiln With A Sentry Xpress Programmer.

Paragon Kilns, Furnaces, and Ovens For Annealing, Beads, Ceramics, Enamels, Glass, Jewellery, Knife Making, Lost Wax, Silver Clays, Heat Treating, Lampwork, Porcelain, And Vitrigraph.

is a Cherry Heaven internet resource. Cherry Heaven is a top-tier international distributor for Texas-made Paragon kilns, furnaces, ovens, and accessories, and has been one of their top-selling partners from 2006 to : a pleasing outcome since the UK is only one third the area of Texas and one fortieth the area of the US.

As this is an on-line resource, there isn't a paper catalogue or a price list. However, you can mail or call a technician about kilns, power supplies, public area safety, a special project, business ideas, diagnostics, repairs, or reselling opportunities.


Art Clay UK. Bartlett kiln Controllers. Cherry Heaven. Electric Kilns. Electric Tumblers. Euroversity. Kitiki. Learning English. Lucas Cameron. Mini Kiln. Orton Kiln Controllers. Oxford English. Oxford English Training. Paragon Kilns International. Paragon Kilns UK. Paragon Kilns DE. Paragon Kilns EU. Paragon Kilns US. Professor English. Prometheus Kilns. Paragon Kilns UK Accent Gold Accessories And Tools Art Clay Silver ClayParagon BlueBird Bead-Annealing Kilns Bronze Clay Paragon Caldera Ceramics Kilns Paragon Catalogue Ceramics Copper Clay Silver Clay Courses Photos Of Dorset Paragon Dragon Ceramics And Glass Kilns Frequently Asked Questions Paragon FireFly Ceramics  Kilns Paragon Fusion Glass Kilns Paragon F LampWorking Kilns Glass Clay Paragon GL Glass Kilns Kiln Help Paragon Home Artist Kilns Paragon HT Heat-Treating Kilns Image Transfer Solution Paragon Janus Ceramics Kilns Paragon KM Knife-Making Kilns Lost Wax Burnout And Casting Contact By Mail West Holme Map Metal Clay Veneer Metal Clay Veneer About Me Kiln Photos Paragon PMT Heat-Treating Kilns Programmers Paragon SC Jewellery Kilns Silver Etch Paragon Kilns Shop Paragon TNF Ceramics Kilns Paragon Trio Slumping KIln Tumblers And Polishers TV Programmes Paragon Vulcan Crucible And Glass Kilns Paragon W Jewellery Kilns Paragon Xpress Ceramics Kilns


UK To EU Plug Adapter.
Ceramic Block.
Ceramic Cloth.
EU Plug.
UK-EU Adapter.
Dry Powder Extinguisher.
Glare Resistant Glasses.
HEPA Mask.
heat-resistant Gloves.
Kitiki Cutters.
Kitiki Flush Cutters.
Kitiki Flat-Nose Pliers.
Kitiki Pointed-Nose Pliers.
Kitiki Bent-Nose Pliers.
Kitiki Round-Nose Pliers.
Protective Glasses.
Potter & Brumfield Relay.
Dorset, SW England.
UK 13A Plug.
The AX-4 Digital Controller.
MiniKiln Closed.
Prometheus Pro-7.
Large Rubber Drum 950gm Open
Bartlett-Paragon Touch Screen Digital Controller.
Paragon BlueBird Bead Annealing Kiln.
Lauscha by Carrie Fertig.
Activated Charcoal Granules.
Paragon Caldera Ceramics Kiln.
Paragon Caldera Bead Kiln.
Paragon Fusion CS14D Glass Kiln.
Paragon Fusion CS14SB Glass And Bead Kiln.
Paragon Caldera XL Ceramics Kiln.
Paragon F500 Lampwork Kiln.
Paragon FireFly Ceramics Kiln.
Paragon Fusion 7 Glass Kiln.
Paragon Fusion 8 Glass Kiln.
Paragon GL18ADTSD Glass Kiln.
Paragon HT-14D Heat Treating Furnace.
Paragon Janus 1613 Ceramics Kiln.
Paragon KM18D Knife Making Oven.
Paragon-Orton Vent Master: Unassembled.
Paragon-Orton Vent Master: Suction Cup.
Paragon Pearl 18 Glass Kiln.
Paragon PMT21 Heat Treating Kiln.
Paragon Door Peephole And Vent.
Stainless Steel Pans.
Paragon SC-2 Black Jewellery Kiln.
Paragon SC2 Jewellery Kiln.
Paragon SC2B Bead-Door Kiln.
Paragon SC2W Enamelling Kiln.
Paragon SC4 Glass Kiln.
Paragon SC2BW Jewellery And Bead Kiln.
Paragon SC2D Pro-3 Jewellery Kiln.
Paragon SC2 Shelf Kit.
Paragon SC-2 Jade Jewellery Kiln.
Paragon SC-2 Black Jewellery Kiln.
Orton-Paragon Sentry Xpress Programmer.
Orton-Paragon Sentry Programmer.
Bartlett-Paragon Sentinel Touch-Screen Controller.
Paragon SC-2 Pink Jewellery Kiln.
Paragon SC-2 Pro Black Jewellery Kiln.
Paragon SC-2 Turqoise Jewellery Kiln.
Paragon SC-2 Purple Jewellery Kiln.
Paragon SC-2 Navy Jewellery Kiln.
Paragon SC-2 Berry Jewellery Kiln.
Paragon ST-8 Kiln Table.
Paragon Kiln Table With Casters.
Paragon TNF 1613 Ceramics Kiln.
Paragon GL24 Kiln Table.
Paragon Xpress 1613 Top Row Of Bricks.
Paragon W Lost-Wax Casting Kiln.
Paragon Lost-Wax Burnout Tray With Grille.
Paragon Lost-Wax Burnout Tray With Grid.
USB Plug.
Paragon Xpress E-12 Jewellery Kiln.
Paragon Xpress E-12B Bead Kiln.
Paragon Xpress E-14 Glass Kiln.
Paragon Xpress Q-11 Ceramics Kiln.